Noodle packing machine Operation method

- Jul 17, 2020-

Noodle packing machine Operation method: End-side edge blanking machine (table and chair can be firmly attached); check the work surface before use, remove surface dirt, and add some lubricating oil to the face knife sleeve and gear. Rolling: First remove the cutting knife, adjust the regulators at both ends of the pressure roller, adjust the gap between the two rollers to 2.5-3mm, insert the plug into the TY 220 V power socket, press the switch on the machine, and coordinate well Put the dough into the hopper. Introduce pressure between the rollers, repeat the roller 4-5 times, * adjust the gap of the 1.5 mm surface roller, and press once; cutting surface: install a cutting machine, adjust the regulator as needed, turn the regulator clockwise, and cut counterclockwise For the thick side, introduce the pressed blank between the two rollers until the cutter is cut into the rough side or the thin side. End: After use, turn off the machine power switch, unplug, clean the body, knife and roller.

 

Main features of noodle packing machine:

1. Dual frequency inverter control, package length setting cutting, no need to adjust air walking, humanized operation automatically prompts, saving time and film;

2. The main control circuit adopts imported single-chip microcomputer, man-machine interface, frequency conversion control, convenient and fast parameter setting, intuitive operation concentration, fully realizes humanized automatic operation control;

Digital fault self-diagnosis function, fault diagnosis is clear;

4. Packing speed and bagging length are controlled by dual frequency conversion. Digital position input is used for sealing and cutting. The position of sealing and cutting is accurate, beautiful and firm.

5. High photoelectric eye automatic tracking;

6. Positioning stop function, no sticking knife, no cutting material, no waste coating;

Dual frequency conversion, simple mechanical structure, less wear, easy maintenance and long life;

8. The sealing temperature is independent, and PID control is applicable to various packaging materials.

9. All the control is realized by software, intermittent aeration device and alcohol spray device can be installed. Functions can be adjusted instantly, and technological upgrades will never fall behind.