dried stick noodle pasta making machine installation and operation
First, the installation guide
Mechanical installation must be flat and fixed. Open the side cover, add 30 # oil in the reducer. Press the ground wire to mark the ground wire.
Connect the power, try positive and negative, under normal circumstances, press the upper triangular belt, and then prison motor cover.
Second, the operating guide
Adjustment: adjust the roll gap with the hand wheel, the reference data of each roll gap is: (more than 330 units) In the adjustment process, tighten or relax the hand wheel number, and sometimes difficult to align, the key is Understand the truth, patiently grasp, not skilled can be shut down to adjust, lock the hand wheel normally.
Quality control service includes pre-acceptance, departure inspection, arrival inspection, delivery inspection and ensureing goods replaced within 15 days after arrival.
Notes
After stopping to keep the machinery clean, no residual within the roll, no billet.
should keep the gear, rolling bearing lubrication.
It is strictly prohibited other hard debris fell into the roll and gear.
Change bearing grease every six months.
It is forbidden to adjust the roll clearance to 5mm or more.